Installing Composite Decking With Screws

Some composite decking materials are designed to be installed with hidden fasteners. These clip systems generally are screwed into to the deck frame across each joist and fit tightly into a cavity running down the side of the boards.

Composite Decking Fixing Instructions

Decking How To Install Your Decks With Trex Decking

Installing Composite Decking How To Install S With Screws In

The duralife step clip and fastenator systems are ideal for installing interior deck boards while the cortex plugs are great for hiding screws on steps edge boards and benches.

Installing composite decking with screws.

Once we had removed the old wood deck boards we installed trex enhance composite decking.
Though composite decking is more stable than regular pine it still can break when driving fasteners close to the edges.
Install last plank with composite decking screws.

Enhance composite decking is made from 95 recycled content and is easy to cut and drill with standard tools.
Composite decking should be stored on a flat dry surface at least 90 mm off the ground.
Three inch decking screws are the best fastener choice.

Composite decking is made from a mixture of wood fibers and plastic polymers.
They sink a secure distance into the joists and won.
To avoid damage we recommend that composite decking materials remain covered until installation.

We recommend using reverse thread screws when face screwing composite decking to eliminate mushrooming.
It requires less.
You can screw or nail composite decking boards just like wood ones.

Duralife decking offers three composite decking hidden fastening systems to make deck installation fast easy and flexible.
Snap chalk line across deck boards.
When installing your composite decking having the correct screws can save you a load of time and frustration.

To install last plank used end nippers to remove the spikes from one side of hidden fasteners.
Screw a straight edged board to deck to act as a saw.
Composite decking should never be dropped or dragged as it may result in damage to the quality of the material.

Composite deck screws are designed so that they do not push the material out and will create a much more uniform and tight fit.
At outer end of deck notch the decking as necessary to fit around the railing posts.

Composite Decking Hidden Screws Fasteners Trex Transcend

Common Composite Decking Problems

Installing Composite Decking Laying With Screws On Grass

Share this post